Class 08 exhauster speed up resistor

Technical queries, 'wants', spares for sale / swap etc.

Class 08 exhauster speed up resistor

Postby MidlandsDave » 17 May 2018 08:50

Hi,

Apologies for asking a question as my first post.

I’m trying to re-commission the exhauster on a dual braked 90v 08 that was converted to radio remote control. The contactors for it had been removed but the wiring still existed to the terminals. I have fitted contactors and wired everything up. When testing the exhauster it runs but does not speed up when I press the lever down on the brake handle (this does operate contactor XC1 ok). I have tested between XC1 and EAA expecting to measure a resistance but I get open circuit. I can’t find where this resistor is physically located - can anybody point me in the right direction please?

Many thanks.
David Bailey
Volunteer at CVR
MidlandsDave
 
Posts: 1
Joined: 17 May 2018 08:26

Re: Class 08 exhauster speed up resistor

Postby hump_shunter » 19 Jul 2018 16:36

Are you still looking?

I have an old schematic which shows a resistance coil between XC1 and EAA on the main resistance frame, top row, second coil from the left.
So the same frame that has the main generator resistance coils etc.
Andy Prime
Bluebell Railway
hump_shunter
 
Posts: 46
Joined: 16 Jun 2010 19:20


Return to Technical Queries

Who is online

Users browsing this forum: No registered users and 2 guests

cron